Locate your reverse stitch knob, button or switch. Reverse stitch mechanisms are most often located on the front of your machine, either on the center of the faceplate, above the needle or on the left-most front.
Why won’t my sewing machine go up and down?
A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. Engage the hand wheel clutch if you have it disengaged for bobbin winding. … You’ll typically need to have a service technician examine the sewing machine and fix a drive gear failure.
How do you unjam a Brother sewing machine?
How do I get my machine un jammed?
- Immediately stop the sewing machine.
- Turn off the sewing machine.
- Remove the needle from the machine. …
- Remove the presser foot and presser foot holder from the machine.
- Lift up the fabric and cut the threads below it. …
- Remove the needle plate cover.
1 of 2 found this helpful. Do you? For short distances of reverse sewing, you must hold down the button, like when you’re locking your stitches. If you have a longer distance where you need to sew in reverse, it’s best, instead, to needle down and pivot the fabric so you’re then sewing forward again on the fabric.
Why is My Brother sewing machine sewing in reverse?
The reverse button may be stuck in the reverse position. – Press and release the button to see if it releases and allows the machine to sew in the forward direction. … If you do not hold the button down while sewing reinforcement stitches, the needle will sew in the same place.