You asked: Why does my zig zag stitch pucker?

How do I stop a zig zag stitch bunching?

I suggest using a stabilizer in the area. If you’re fabric is washable, use a water soluble stabilizer that washes away after you finish doing the stitches. You might also want to do a narrower zig zag stitch instead of a wider one, if you can. Hope that helps.

What tension should I use for zig zag stitch?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

How do you fix a zig zag stitch?

Try some of the simple things first. Remove the bobbin plate using a screwdriver and then remove the bobbin. Clean out any lint that may be under the bobbin and which may cause your zigzag stitch not to work. Replace the bobbin and the bobbin plate and test your zigzag stitch.

How do you adjust a zig zag stitch?

Zig zag stitch can be adjusted by changing the settings on the machine. A higher number on your stitch length makes the zig-zag longer and the width dial will indicate the width of the stitch and change it to wider or narrower.

IT IS INTERESTING:  Quick Answer: Can a tailor make my pants slimmer?

What causes puckering?

Puckering is usually caused by one or more of the following conditions: Yarn Displacement (structural jamming of fabric yarns). Tension Puckering (excessive thread tension and recovery). Machine Puckering (uneven ply feeding).

What is puckering in pants?

Puckered seams are a dead give-away that seams have not been sewn with the proper sewing technique. Really, it all comes down to understanding how fabric is woven.

Why are my seams wavy?

The weight of the fabric hanging down is often enough to stretch it and cause those wavy seams we talked about before. Steam – If you have already sewn your seam and it turned out a little wavy, steaming the seam can often help smooth it out. Steaming is different than ironing. Do not move the iron back and forth.