How do you clean the bobbin case on a brother cs6000i?

Why is my bobbin case not spinning?

Bobbin Case Not Turning

First, it may be that your bobbin thread tension is too tight. … The other source may be due to your bobbin thread winding up under uneven tension. To fix this issue, you will need a new bobbin, wind the thread slowly and make sure the tension is nice and even.

Do I have to oil My Brother sewing machine?

If you are a Light to Moderate user (2 – 3 hours per day), your product should be oiled as described in the User’s Manual. Most products require 1 – 2 Drops of Sewing Machine Oil at each oiling point, once a month, taking care to remove any thread or dirt and to wipe off any excess oil.

How do I remove the bobbin from My Brother sewing machine?

Loosen the presser foot screw and the needle clamp screw to remove the presser foot holder and the needle.

  1. Grasp both sides of the needle plate cover and then slide it toward you to remove the needle plate cover.
  2. Remove the bobbin case. Grasp the bobbin case and then pull it out.

How do you fix a bobbin problem?

How to Fix Bobbin Thread Bunching and Other Threading Problems

  1. Thread the Machine Properly. Re-thread the upper part of the sewing machine making sure the thread is passing through every single thread guide on its way to the needle. …
  2. Change the Needle. …
  3. Inspect the Bobbin. …
  4. Clean the Machine.
IT IS INTERESTING:  You asked: How can you tell what size your knitting needles are?