Can you change the height of the presser foot?
Turn the presser foot pressure dial at the back of the machine to adjust the pressure of the presser foot. – The presser foot pressure can be set to one of four levels (between 1 and 4). – The larger the setting, the stronger the pressure. Use setting 1 or 2 for thick fabrics, use setting 3 or 4 for thinner fabrics.
How do I lower my presser foot level?
(Presser Foot Lifter button) is pressed while the presser foot lever is raised/the needle is lowered. Lower the presser foot lever manually to lower the presser foot. If the operation procedure was correct, the machine will beep once. If the operation procedure was incorrect, the machine will beep twice or four times.
Do you sew with the presser foot down?
Always be sure your presser foot is in the DOWN position before sewing. Sewing with the presser foot in the up position will cause your thread to tangle and your bobbin to jam. Change needles regularly (after every 6 – 8 hours of use) as dull/weak needles can cause damage to your machine and fabric.
What should you do if the take up lever is not visible?
How to thread the take up lever when it does not come out of the…
- Raise the needle to its highest position by turning the hand wheel toward you.
- Make sure the mark on the hand wheel points up, or just press the needle position button twice to raise the needle.
Why is my presser foot loose?
There could be several reasons why your pressure foot is loose. The presser foot screw is loose, pressure shank is worn and needs to be replaced or the pin on the presser foot bottom is worn and needs to be replaced. … Raise the presser foot lever.