Can I unwind a bobbin?

How do you unwind a spool of thread?

Do you? Pull on the bottom of the spool. It will pop open. This is nice because after you use the spool, you can wrap the thread around by using the notches in the bottom of the spool and then push up on the bottom and it locks the thread back in place.

Why isn’t my bobbin thread coming up?

First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.

Why is my thread bunching underneath?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

What does spoll mean?

1 : a cylindrical device which has a rim or ridge at each end and an axial hole for a pin or spindle and on which material (such as thread, wire, or tape) is wound. 2 : material or the amount of material wound on a spool. spool. verb. spooled; spooling; spools.

IT IS INTERESTING:  You asked: How do I decorate my sewing room?

What holds the bobbin while it winds?

Bobbin spindle– holds the bobbin while it winds. Bobbin winder tension- provides tension on the thread when the bobbin winds.