Best answer: How do you get bobbin thread to catch brother?

Why is My Brother sewing machine not catching the bobbin thread?

Check the upper thread. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly. – Re-thread your machine, if necessary.

How do I get my brother sewing machine to pick up the bobbin thread?

With your right hand, turn the balance wheel toward you (counterclockwise) until the needle moves down and back up again to its highest position. The upper thread should have caught the lower thread in a loop. Pull the upper thread toward you and the lower thread will come up from the bobbin in a large loop.

What do you do if your bobbin thread won’t catch?

Your Needle Is Not Inserted Correctly

If your needle is not being held in all the way, it won’t be in the right place to grab your bobbin thread. Make sure your needle is inserted all the way up and tightened as much as possible. Also, make sure not to insert your needle backward on your sewing machine.

IT IS INTERESTING:  What makes a cross stitch a distinct type of sewing or embroidery technique?

Why is my thread bunching underneath?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

Why won’t my sewing machine needle go up and down?

A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. … If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt. Replace the drive belt if it’s broken.

What weight is embroidery bobbin thread?

Machine embroidery bobbin thread is different from regular thread. First of all, It is a lot thinner. Typically, it is either 60 or 90 weight, whereas standard embroidery thread is typically 40 weight. And, a higher weight number means a thinner thread.