What can I use instead of grout for mosaics?
Using Epoxy Resin as an Alternative to Grout | How To Mosaic Techniques – The Mosaic Store.
What is the purpose of grouting a mosaic?
Reasons for grouting: It helps bring the piece together and unite it. For outside pieces it helps protect the mosaic and adhesive. It fills the gaps where you are using materials that are difficult to fit together tightly.
Can you use sanded grout on mosaic tile?
If you’re buying powder grout, make sure to check if the grout is sanded or unsanded. Most of the glass mosaic tile manufacturer recommends that you don’t use sanded grout as it can damage the tile surface.
Can I use any grout for mosaics?
Don’t Use Cement-Based Grout for Mosaics
Actually, there are no specific requirements for the type of grout you would use for a mosaic. The type of grout and the method of application is the same as it would be for any type of tiling project.
Can you epoxy over mosaic tile?
If you do use a clear coat to make a level surface over a mosaic made from irregular pieces, then make sure you use an epoxy and not a polyurethane. Polyurethanes are not as hard and scratch-resistant as epoxies. They also do not bond securely to glass the way epoxies can.
What can I use for mosaic backing?
The best all-around mosaic backer is concrete backer board, such as that used in bathrooms as the sub-floor for tile floors. Concrete backer board is cheap, cuts easily, comes in 1/4″ and 1/2″ thick sheets, and is available at almost any building material store.
What kind of grout do you use for glass tile?
We suggest using Mapei Keracolor U non-sanded grout. It’s important to use a nonsanded grout with glass tiles, as sanded grouts can potentially scratch the glass surface. This grout should only be used with grout lines between 1/16″ – 1/8″ (1.5 mm – 3 mm).
Do I want sanded or unsanded grout?
Sanded grout is best for grout lines ranging from 1/8-inch to 1/2-inch. Grout lines wider than 1/2-inch are impractical and will crack and become unstable. Because unsanded grout can also be used for 1/8-inch lines, between the two it is recommended that you use sanded grout.